Diagnose common flexographic print problems and work through likely causes and fixes.
The Print Defect Troubleshooter helps diagnose common flexographic print faults, walking from the symptom on the sheet to the likely causes and the things to try, with reference images so you can match what you are seeing. Dot gain, dirty print, haloing, mottle and pinholing all look a certain way, and knowing the usual suspects saves a lot of standing at the press guessing. It runs in the browser, yours to try for 7 days with no card, and puts a structured fault-finding reference in reach of any operator or prepress desk.
Start from what you see on the print.
Work through the usual suspects with reference images.
Follow the suggested things to check and adjust.
Common flexographic defects such as dot gain, dirty print, haloing, mottle and pinholing.
Yes, so you can match the defect you are seeing.
Start with a 7 day trial, full access, no card needed. After that it is Pro R899 a month, Studio R2,499 a month or Enterprise from R7,499 a month; see the pricing page for details.
Flexo Africa